Legislation Details

Record #: O2015-2171   
Type: Ordinance Status: Passed
Intro date: 3/18/2015 Current Controlling Legislative Body: Committee on Transportation and Public Way
Final action: 4/15/2015
Title: Grant(s) of privilege in public way for Winthrop House LLC - bicycle rack
Sponsors: Osterman, Harry
Topic: PUBLIC WAY USAGE - Grants of Privilege
Attachments: 1. O2015-2171.pdf
ORDINANCE WINTHROP HOUSE LLC Acct. No. 396001 -1 Permit No. 1116699

Be It Ordained by the City Council of the City of Chicago:
SECTION 1. Permission and authority are hereby given and granted to WINTHROP HOUSE LLC, upon the terms and subject to the conditions of this ordinance to construct, install, maintain and use one (1) Bicycle Rack(s) on the public right-of-way adjacent to its premises known as 5411 N. Winthrop Ave
Said Bicycle Rack(s) at N. Winthrop Avenue measure(s):
One (1) at thirteen (13) feet in length, and one point five eight (1.58) foot in width for a total of twenty point five four (20.54) square feet.
The location of said privilege shall be as shown on prints kept on file with the Department of Business Affairs and Consumer Protection and the Office of the City Clerk.
Said privilege shall be constructed in accordance with plans and specifications approved by the Department of Planning and Development and Department of Transportation (Division of Project Development).
This grant of privilege in the public way shall be subject to the provisions of Section 10-28-015 and all other required provisions of the Municipal Code of Chicago.
The grantee shall pay to the City of Chicago as compensation for the privilege #1116699 herein granted the sum of zero ($.00) per annum in advance.
A 25% penalty will be added for payments received after due date.
The permit holder agrees to hold the City of Chicago harmless for any damage, relocation or replacement costs associated with damage, relocation or removal of private property caused by the City performing work in the public way.
Harry Osterman 48th Ward















Page 1
(Page 2 of 9)


(For use in concrete only) ^ ^
Enclosed you will find (4) spikes, which will replace the (4) corner hex bolts (3/8"-16x3-1/4"). Step 1-
Once the rack is assembled, determine where the holes for each corner will lay on the foundation and mark those points.
Step 2-
Using a 3/8" ANSI standard carbide drill bit, drill a hole 3...

Click here for full text